Hot-water surface cleaning for driveways, walkways, patios, and all flatwork concrete. Serving every Sacramento neighborhood — Sacramento County.
The oldest driveways in Sacramento sit under the oldest trees. In East Sacramento, Land Park, and Curtis Park, plenty of homes still run on their original poured concrete — narrow ribbon drives and garage aprons that have been curing since before the war. That concrete is softer than modern pours and often hairline-cracked, so we widen the surface-cleaner pass, moderate the pressure, and let hot water and dwell time do the cutting. The real enemy under that canopy isn't oil, either — it's the trees. Camphor and valley oak leaf drop stains those slabs with tannin every fall, and the shade keeps north-facing walkways green through the tule-fog months.
Cross the American River into Natomas and the concrete changes completely. Tract slabs from the 1990s and 2000s are broader, harder, and HOA-visible from the street, so the complaint we hear is uniformity — tire shadowing and rust rings from irrigation overspray rather than deep grime. Down in the Pocket and Greenhaven, 1970s exposed-aggregate drives shed pea gravel if the nozzle runs tight, so the pressure comes down and the pass slows. One city, three eras of concrete, three different washes.
Sacramento's flatwork is as varied as the housing behind it. East Sac Tudors often pair the driveway with a brick walkway that wants low pressure and a wide fan so the mortar joints stay put. Land Park and Curtis Park bungalows carry original poured concrete that has gone chalky on the steps — hot water and patience there, not raw PSI. Stamped patios in North Natomas keep their color only if the pressure stays moderate and the sealer stays intact. And on the commercial end — Midtown alley aprons, Oak Park storefront sidewalks, Power Inn dock slabs — it's straight hot-water degreasing at full scale: gum, forklift oil, and dumpster-pad grease included.
Square footage drives most of it, and Sacramento swings wide: the ribbon drive on a Curtis Park lot is a fraction of the flatwork behind a three-car Natomas garage, and the quote scales with it. Condition comes next — a slab under the East Sac canopy that hasn't been washed in years carries tannin and algae that need pre-treatment before the surface cleaner earns its pass. Surface type matters too: brick and exposed aggregate take slower, more careful work than broom-finished concrete. Access rounds it out — Midtown infill lots with alley-only approaches or no working hose bib add setup time. Every quote is free, written, and back to you within one business day.
A typical call comes from a Land Park owner prepping a 1930s bungalow for sale: original ribbon driveway gone charcoal under a street camphor, algae on the shaded walk to the porch, and one stubborn oil patch where a project car sat for years. We pre-treat the oil and the organics first, run the surface cleaner at a pressure the old concrete tolerates, then hand-wand the ribbon edges and porch steps so the finish reads even from the curb. A final rinse carries the residue off the slab, and the driveway is back to its actual gray in about two hours — in time for the listing photos.
Heavy oil, transmission, or rust spots get hit with degreaser before the surface cleaner ever touches them.
A pressurized surface cleaner delivers an even, edge-to-edge pass — no zebra striping, no missed strips.
Edges, expansion joints, and trim work get a manual wand pass so the whole slab looks uniform.
Everything gets a fresh-water rinse so detergent residue doesn't dry on the surface.
Don't see yours? Call (916) 404-0288 — we're happy to talk it through.
Free written quote across all of Sacramento. We dispatch 24/7.